clay processing plant of bearing bushing mainly refers to the operation of the spindle. This operation is very strict. If it does not meet the production requirements, it will cause the spindle problem to rise. If serious, it will make the production The phenomenon of bearing deformation and breaking occurs, so the scratching of the bearing bush must meet the production requirements.
In the production of clay processing plant, not only the operating conditions are more stringent, but also the quality of the equipment and the requirements of its internal components are more stringent. Generally speaking, the required parts of the material and the casting process must be up to the smooth If there is a phenomenon that the quality of the parts is not reached, unexpected failures may occur during production. For example, for the main shaft, if the quality of the parts is not reached, the parts will break. Such phenomena, so for the failure of its production, may also be due to failure of the part design stage.
Through the above introduction, it can be found that the important significance of bearing scraping is that it may cause the bearing to generate heat. If the phenomenon of heating is not resolved, it will be deformed or even broken. Therefore, when this phenomenon occurs, it is necessary to The inspection of the quality of the bearing squeegees requires scrutiny until it meets the technical requirements. Since the clay processing plant is required to work under strict technical and operational conditions, it requires strict control of all aspects. get on.
In fact, not only is the bushing scraping important for the production of the equipment. In the actual production process, the lubrication and material feeding will affect the production process. All of them need to be strictly operated. Good efficiency and finished product quality.
The pressure, the parts of the mobile crusher are very easy to damage, for example, the grinding chamber of the mobile crusher will wear when the temperature rises.
The grinding room is used to grind the material. During the working process, the parts inside the grinding chamber are worn with the material with a certain hardness. With the increase of the temperature, the wear resistance of the grinding chamber can be improved.
A certain change, which makes it vulnerable to damage, so when the temperature of the mill chamber is increased, it is necessary to inspect the lubrication and sealing, and to prevent problems such as excessive friction due to lubrication and sealing problems.
In addition to processing the mill when its temperature rises, it is more important to choose good mobile crusher If the performance of the mobile crusher does not change with high temperature, it will reduce the wear of the mobile crusher due to temperature production. It will help to prolong the life of the mobile crusher and reduce the operating costs, and help the production of ultra-fine powder to obtain better production efficiency.
Vibration screening equipment in recent years to get a new equipment of rapid development, in the production process is mainly used to sieve out the different particle materials, or filter out useful materials, separate out impurities. Details about the kaolin processing equipment, can refer to the information on the website. At present the vibration screen has been widely used in mining, metallurgy, coal, petroleum chemical industry, water conservancy and electric power, light industry, construction, transportation and railway in many industries, with the process to complete a variety of different.
Application in mining industry of the vibrating screen is particularly widespread.On the kaolin processing equipment to find out advantages and disadvantages, we can simply, kaolin processing equipment is stable and reliable, less consumption, low noise, long life, vibration mode stability, high efficiency screening.
Vibration sieve at work, two motor synchronous reverse rotation to generate reverse exciter exciting force, forcing the mesh sieve body driven to do the vertical movement, the material on the exciting force and periodic thrown forward in a range, material screening operation to complete. For sieving sand quarry stone, also can be used for product classification for coal preparation, ore dressing, building material, power and chemical industries.
In order to improve the development status of sand making machine itself, in order to meet the requirements of customers, keep up with the pace of development of the times, sand making machine equipment is also in the unceasing innovation, change. sand making machine manufacturers will enhance the assembly products, as institutions after its development to, which also became the challenge of major domestic ore machinery.
Sand maker manufacturers have been developed for the preparation of gravel, sand industry classification and transport for the development of the professional equipment, sand making machine models have obvious advantages in yield, efficiency, investment costs, repair costs. It appears the perfect continuous multitudinous specialized sand making industry in China, also make the product to obtain the perfect, brought new development opportunity more sand industry, believe that with its unique characteristics and advantages becomes the best choice for many customers.
As a professional sand making machine equipment manufacturers, always adhere to the science and technology as the guide, to customer satisfaction for the service concept, in good faith, innovation, using the grinding principle, the energy saving control in 30% ~ 50%. The use of automatic control of grinding roller pressure control mode, the grinding pressure obtains the accurate control, saving manpower cost. sand making machine equipment manufacturers at reasonable perfect equipment, plan, perfect after-sales continue to reform, and the time synchronization requirements.
According to the materials provided by the manufacturer, self-purchasing production, if the Ultrafine Mill dust effect is poor, or found that there is a phenomenon of cloth bags, remove the bag, replace it with a new one, and then do not throw away the old bag, After washing with water, dry it and use it again;
To clean up Ultrafine Mill, this can meet the needs of environmental protection, but in the actual work process, sometimes the material is stored in the dust collector, which has a greater impact on the quality of the material, so it needs to be carried out in a timely manner. Treatment, a common treatment method, is to timely clean the dust remover of the ultra-fine mill and eliminate the materials in it, so as to ensure a reasonable production process and ensure the uniform quality of the finished product. What are the methods?
You can also use manual punch filter bag to remove dust, but this method is relatively slow, because human labor is much slower than the mechanical operation, but want to reduce the cost of ultrafine mill production For customers, it is a better choice;
The article mainly introduces the problem of how to deal with the problems of ultrafine mill dust collectors. Here are four methods. These different methods are applicable to different production sites. Customers can use their own actual conditions. By selecting, no matter which method, the material in the precipitator can be cleaned, thus ensuring a smooth production process and suitable product quality.
Vertical roller mill is an important production equipment for fine powder, which will be damaged in various kinds of graphite production lines. In order to make the equipment work better, we will introduce the vertical roller mill in graphite production line Operation and maintenance measures to ensure that equipment for production projects bring greater productivity.
Ultrafine grinding is often used in the production of graphite, the production line due to the friction between the various components of the device or the operation of the incorrect method will cause some damage to the device over time will affect the ultra Fine grinding equipment service life, and even bring safety accidents. These are bad for the production process, so the proper operation and maintenance of vertical roller mill in graphite production line is very important.
Any kind of equipment has a standard operation, ultra-fine mill is the same, in general, when the factory equipment manufacturers will guide the operation of the device more standardized, first of all equipment before the boot check, to To ensure that all doors and windows tight to prevent the work process of materials flying out of the device to cause safety problems, and to ensure that the equipment is no-load start, once found the residual material to be promptly removed.
The after-sales service is a lot of sand making machine user concerns. On the sand making machine operation specification and attention, we also consulted a number of manufacturers, summed up the following points. The user can do some reference before operating system sand machine.
Run check adjustable vortex chamber observation door is closed, to prevent the material from the whirl cavity observation door out of danger;
Check the impeller rotation direction, from the inlet direction. Impeller should counterclockwise rotation, otherwise should adjust the motor wiring;
Crushing machine and conveying equipment startup order: row material, crushing machine, feeding;
Crusher start to load, the crusher is operating normally after the direction of feed, the shutdown sequence and boot in reverse order.
The discharging equipment to stop, should promptly stop feeding, otherwise, will cause squished impeller, burning of the electric motor; the 6 feeding to the continuous uniform;
Crusher operation process, there shall be no violent vibration and abnormal noise, otherwise, it should stop checking;
Sand making machine lubrication, lubrication grease lubrication by the way, the car with grease superfine, adding amount of the bearing cavity 1/2-2/3, crusher every class, adding grease, the work of a number of class, open the main bearing cleaning main bearing, bearing replacement when necessary.
Sand washing machine is also called stone washing machine, mainly used for the removal of impurities sand products (such as dust) machine. Because of the use of more water washing method, it is known as the sand washing. sand washing machine is the artificial sand (including natural sand washing equipment).
According to its appearance and design principle of different, washed sand and equipment can be divided into spiral sand washing machine, drum washing sand machine, hydraulic sand washing machine, sand washing machine and some other types of vibration. Sand washing machine is widely used for the washing of the material, sand and gravel mining, building materials, transportation, chemical industry, water conservancy and hydropower, concrete mixing stations and other industries.
It can remove the gravel covered surface impurities, while undermining the vapor layer coated sand surface, in order to facilitate the dehydration, the role played efficient washing sand cleaning. In the sand production line equipment in general, washed sand for sand washing process of the last link in the. In a sand production line, in addition to washed sand equipment, there are some main equipment, such as gravel crusher, feeder, conveyor belt and so on.